The Ready to Cast kit has everything needed to start casting, plus a choice of a free double cavity bullet mold or ingot mold. Kit includes the 110 Volt Production Pot IV (North American customer’s only), Lead Ladle, Mold Mallet and FREE mold. The Production Pot IV melter furnace features a large, deep pot that holds approximately 10 pounds of lead. Melt time of less than 20 minutes. Pour spout up front where it belongs so you can see what you’re doing. Infinite heat control. Uses only 500 watts of power during heat-up and a lot less to maintain temperature. Large, stable base for safety. 4″ of clearance under the spout is high enough to accept all brands of bullet molds and most sinker molds. Melter is capable of reaching 900 degrees Fahrenheit. The Lead Ladle is the perfect size for casing bullets. It holds enough lead that the molten metal stays hot enough molds will produce great bullets and the caster will not get fatigued. The ladle is also great for stirring metal alloy and skimming dross from the surface of the lead pot. The Mold Mallet features Ash hardwood construction utilizing the same wood species baseball bats are made from. Use the mallet to gently tap the sprue plate to release bullets from mold cavities.